STA-W200 is an economic vacuum wire melt spinning system for the research lab to prepare amorphous metallic wire < 20-micron diameter via induction heating and rapid quenching on a specially designed spinning copper wheel.
SPECIFICATIONS:
Features | l The system consists of the vacuum chamber and induction heating with a spinning wheel with max. 70 meter /sec. spinning speed l Can melt metallic sample around 10 - 50 g per batch. up to 2000oC. l Customer can use own vacuum pump and water chiller to save cost |
Power Requirements | l Input Voltage: 208 - 240V AC, Three Phases l Input Power: 20 KW ( 70A breaker required) |
Vacuum Chamber & Vacuum pump | l acuum chamber: 400 mm diameter x 350 mm L l Hinged type door with quartz glass observation window l KF40 port to connect to a vacuum pump l Can achieve 5 x10 E-5 torrs by a turbopump l A 2-meter long quench tube is included to receive spun wire |
Induction Heater | l Dual Station 15KW Induction Heater l Frequency: 30 - 80 kHz l Crucible: Ф15×50mm made of BN l Max. sample load: around 2 - 5 g ( Fe) |
Spinning wheel | l Flying wheel made of Oxygen Free Copper l Dimension φ220 × 30mm l 0 - 70 meter / second adjustable |
Wire (silk) diameter | l Wire (silk) diameter is dependable on material and dipping depth l For Fe base alloy usually can achieve < 100-micron diameter l FeSiBNbCu alloy amorphous wire in about 50-micron diameter |
Optional Facility | l Water chiller > 58 L/min is required l A vacuum pump is required. |
Warranty | l One year limited warranty with lifetime support |
SPECIFICATIONS:
Features | l The system consists of the vacuum chamber and induction heating with a spinning wheel with max. 70 meter /sec. spinning speed l Can melt metallic sample around 10 - 50 g per batch. up to 2000oC. l Customer can use own vacuum pump and water chiller to save cost |
Power Requirements | l Input Voltage: 208 - 240V AC, Three Phases l Input Power: 20 KW ( 70A breaker required) |
Vacuum Chamber & Vacuum pump | l acuum chamber: 400 mm diameter x 350 mm L l Hinged type door with quartz glass observation window l KF40 port to connect to a vacuum pump l Can achieve 5 x10 E-5 torrs by a turbopump l A 2-meter long quench tube is included to receive spun wire |
Induction Heater | l Dual Station 15KW Induction Heater l Frequency: 30 - 80 kHz l Crucible: Ф15×50mm made of BN l Max. sample load: around 2 - 5 g ( Fe) |
Spinning wheel | l Flying wheel made of Oxygen Free Copper l Dimension φ220 × 30mm l 0 - 70 meter / second adjustable |
Wire (silk) diameter | l Wire (silk) diameter is dependable on material and dipping depth l For Fe base alloy usually can achieve < 100-micron diameter l FeSiBNbCu alloy amorphous wire in about 50-micron diameter |
Optional Facility | l Water chiller > 58 L/min is required l A vacuum pump is required. |
Warranty | l One year limited warranty with lifetime support |
